Skip to content Skip to sidebar Skip to footer

How Much Sand For Above Ground Pool Base

How Much Sand For Above Ground Pool Base. Sand with small pieces of grit would be fine, level it and compact it sufficiently to prevent any settlement. Position the plank and level from the center of the work area to its edge, like a clock's hand.

How much sand do I need for my pool's base?
How much sand do I need for my pool's base? from knowledgebase.royalswimmingpools.com

If there is less to erode, then any problems you have will be smaller. This will help protect your liner, and provide a soft floor that provides comfort while walking in your pool. There are two types of base materials and one common liner protection material that is laid over the base material.

There Are Two Types Of Base Materials And One Common Liner Protection Material That Is Laid Over The Base Material.


What kind of sand do you use for pool base? Always use masonry sand, which is a washed sand, free of rocks and debris. Use masonry sand as the base material for an aboveground swimming pool.

Mason Sand, For Your Pool's Base Mason Sand, Sometimes Called Mortar Sand, Can Normally Be Found At Any Sand/Gravel Yard Or Masonry Supply.


It is commonly recommended by above ground pool manufacturers to have a 2 sand base inside the pool, under the liner. The pool pads can be cut to perfectly fit your pool’s base. The average cost per cubic yard of masonry sand ranges from.

The Purpose Of The Sand Is Not To Level Your Pool.


Proceed shifting the plank and checking levelness every 2 to 3 feet. A pool pad is a material designed specifically to place under your above ground pool. Always round up the next higher amount if they will not deliver 1/2 yards.

If You Are Using Sand To Level Things Out You Will Have Nothing But Problems.


Sand with small pieces of grit would be fine, level it and compact it sufficiently to prevent any settlement. Ensure that any sand you use is free of debris such as twigs, rocks or anything else that might puncture, rip or tear a pool's vinyl liner. This will help protect your liner, and provide a soft floor that provides comfort while walking in your pool.

The Standard Depth Of Sand That Should Be Used Under An Above Ground Pool’s Floor Is 2 Inches.


There are many other options to put under an above ground pool that sits on grass, such as a commericial pad, concrete pad, or solid foam. It can work well in pools with play or sports bottoms or simply put pool's that do not have a steep slope. Masonry sand volume chart for above ground pool installations.

Post a Comment for "How Much Sand For Above Ground Pool Base"